STS Steel
Released in time:8/29/2013 10:23:30 AM Browse The Times:1833

Description of Cold-Rolled Stainless Coil/Sheet (STS CR):
In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10% chromium content by mass and some other alloy like nickel. The chromium forms a passivation layer of chromium oxide (Cr2O3) when exposed to oxygen. The layer is too thin to be visible, and the metal remains lustrous. It is impervious to water and air, protecting the metal beneath. Stainless steel's resistance to corrosion and staining, low maintenance, relatively low cost, and familiar luster make it an ideal base material for a host of commercial applications. There are over 150 grades of stainless steel, of which fifteen are most common. Cold-rolled stainless steel strip is manufactured from hot-rolled, annealed, and pickled strip by rolling between polished rolls. Depending on the desired thickness, various numbers of cold rolling passes through the mill are required for effecting the necessary reduction and securing the desired surface characteristics and mechanical properties

Steel Grade:
304. 304L (8.0) .301. 316L . 1.4541. 317L. 305. 309S. 310S . 2205. 2304. 316Ti . 347. 430. 409L .410 410S . 1.4003
Size Range: 0.3-3.0mmx1000-2000mmx4000-8000mm or Coil
Coil ID: 610mm
Surface: 2B, BA
Available Chinese Mills: TiscoEtc

Add: Units 9-16, 47/F., World Trade Tower, No. 686, Jiefang Avenue, Wuhan, China
Tel: +86-27-85448800  Fax: +86-27-85448789     General